Australia |en
Change language
PLUTON Group
Technical Parameters of I-PTE generator
| Name of parameters | Unit of measurement | Value | ||
| Type of regenerator | - | I-PTE- 800-825-50-6 |
I-PTE- 1,6к-825-50-12 |
I-PTE- 3,2к-825-50-12 |
| Rated output voltage | kV | 6,3, 10, 35 (±10 %) | ||
| Output voltage frequency | Hz | 50 (60) ±1 | ||
| Number of output voltage phases | - | 3 | ||
| Number of inputs | - | 1 | ||
| Operation mode | - | Intermittent S3, RC = 40 % | ||
| Rated input voltage | V | 825 (750) | ||
| Regeneration setting adjustment range | V | 810…950 (725...850) | ||
| Rated inverted current | А | 800 | 1600 | 3200 |
| Maximum ratio of current overload | - | 1.5 | ||
| Overload time | s | 30 1 time per 10 min, wherein current RMS value for each 15 min should not exceed rated current value |
||
| Type of cooling | - | Natural or air combined* | ||
| Efficiency coefficient, minimum | % | 96 | ||
* - cooling method, which uses natural air cooling of thyristors, and the installed in sections
fans switch on automatically for a short time, when temperature rises to the set level, and switch off when the temperature decreases.